This guide will show you how to configure your Welch Allyn Connex Spot Monitor's (CSM) Bluetooth chip to be heard by DS smart®.
|
1. Skip if you received a Direct Supply USB - Insert the provided USB flash drive into your computer and copy the downloaded configuration and license files onto the top-level directory of your flash drive. |
|
|
2. Power up the CSM you would like to configure. |
|
|
3. Insert the USB drive into the front port. If a Load configuration window does not show up after 15 seconds, unplug the USB drive and insert it again. |
 |
|
4. Select the desired configuration to load. In most cases, only a single configuration will show up. If multiple appear, choose the one with the name you specified when creating the configuration, and without the "._" prefix. Select Load to load the selected configuration. |
 |
| 5. When presented with an additional prompt, select OK to confirm overwriting the old configuration and data. |  |
| 6. After a few seconds, you will be returned to the Home screen and shown a blue bar indicating the configuration has been uploaded successfully. |  |
| 7. To verify the configuration has been updated, select Settings > Advanced, and confirm the name and date of the active configuration file. |  |
|
8. If your USB Drive has a license file on it, do the following steps: |
|
|
 |
|
 |
|
 |